PantryRinser

Built into the countertop, ready whenever you need it

The PantryRinser is built into the pantry countertop, next to the coffee and tea facilities. The rinsing bowl rests on the countertop, or sits flush if the countertop is milled. Cup on top, a short press, rinsed clean within two seconds, without the rinsing station drawing attention the rest of the time.

PantryRinser on the countertop of an office pantry, with a cup above the rinsing point

Suitable for

Pantries with a countertop around the coffee and tea corner

The PantryRinser is designed to blend into the pantry countertop, just like the coffee machine or the tea station beside it. No extra free-standing object in the room: only a flat rinsing tray that becomes visible at the moment it is used.

  • Built into an existing or new countertop
  • Available in white and black
  • Fixed connection to water and drain
  • No electrical connection required
PantryRinser in white
PantryRinser set into the countertop of a pantry at Amsterdam University of Applied Sciences, next to the coffee machine

In use at HvA

Next to the coffee machine, in the same countertop

At Amsterdam University of Applied Sciences the PantryRinser sits flush in the countertop, an arm's length from the coffee machine. Anyone who has just filled their cup rinses it in exactly the same spot. No detour to the sink, no queue at the tap.

Read what customers say →

With cabinet

Rather not cut into your existing countertop?

Alongside the built-in version we supply the PantryRinser in a matching cabinet. The rinsing station comes already fitted into the cabinet top, with an upstand at the back and a closed door below. The cabinet stands free in the pantry, so nothing about the existing furniture changes.

  • Rinsing station already fitted into the cabinet top
  • In white and black, like the PantryRinser itself
  • A closed door, so everything below the top stays out of sight
  • No changes to the existing countertop
PantryRinser fitted into the top of its matching cabinet, white finish

Specifications

PantryRinser at a glance

View the specifications
Placement
Built into the countertop, resting on it or flush if the countertop is milled
Dimensions
260 by 300 by 254 mm
Weight
1.6 kg
Cut-out required
Round hole of at least Ø165 mm in the countertop
Suitable for
Cups and mugs up to 140 mm across, with no maximum height. Plastic, ceramic and glass.
Colours
White or black
Rinsing time
±2 seconds per cup
Water use
About 100 ml per second
Connection
½ inch water supply, 32 mm outlet
Water pressure
Minimum 2 and maximum 5 bar
Electricity use
None
Maintenance (rental)
Annual swap of the rinsing system included

Installation

Connect once, carefree from then on

The PantryRinser is permanently connected to the water supply and the drain. An opening is made in the countertop for the base module: the basin that holds the rinsing system and drains the water away. It is a one-off installation, comparable to that of a tap or dishwasher, without a socket or extra wiring. Would you like to run a pilot first? That is possible with the demo model, which stands loose on top of the countertop and needs no fixed drain.

  • Fixed connection to water & drain
  • No electrical connection required
  • Opening in the countertop for the base module

Maintenance & service

Maintenance is included when renting

Under a rental agreement, Rinse&Go visits once a year to swap the rinsing system. That keeps the installation working reliably, without the organisation having to think about it.

No suitable countertop?

Take a look at the PillarRinser, the free-standing version

To PillarRinser →

Does the PantryRinser suit your pantry?

We are happy to think along about the right spot and connection.

Book an introduction →